Rear, face up, sheet stacker. If this function is not enabled, the printer will stop and request the correct size of paper to be loaded. Lower the top cover but do not press down to latch it closed yet. Holding the cartridge by its top centre with the coloured lever to the right, lower it into the printer over the image drum unit from which the old cartridge was removed. Click the Printing Preferences button 1.

Uploader: Tauzragore
Date Added: 10 January 2015
File Size: 30.32 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 56514
Price: Free* [*Free Regsitration Required]

It is essential that they go back in the same order 1. Holding it by its top centre, lift the cyan image drum, complete with its toner cartridge, up and out of the printer.

Multi purpose feeder shown closed. It should be noted that many of these settings can be, and often are, overridden by settings made in o,i printer drivers.

Page 37 User Settings This tab is intended to be used for normal day-to-day use by any user. Viewing the status of the printer, and viewing or changing the printer menu settings are carried out as follows: Note the positions of the four cartridges. Table of Contents Add to my manuals Add.

Recent Drivers  8460W DRIVER FOR WINDOWS 7

User Settings This tab is intended to be used for x3100 day-to-day use by any user.

The settings available from within your application are only those which you may want to change for specific applications or documents. Cc3100 32 Choose the Manual colour setting 2 and select from the following options: Do not touch it and do not expose it to normal room light for more than 5 minutes.

OKI C Toner Cartridges | Free Next Day Delivery

Keep it the same way round as the old unit. Page 60 Put the cartridge down gently onto a piece of paper to prevent toner from marking your furniture and to avoid damaging the green drum surface.

Standard printed copy Standard blank paper tray. Installation takes a few minutes, and requires a medium size cross- head Philips type screwdriver.

Oki C3100 User Manual

A single on-screen button restores the default settings. Job Options Tab A single on-screen button restores the default settings. Start the Status Monitor. By pressing ‘print’ button you will print only current page. This unit requires replacement approximately every 50, pages.

OKI C3100 Toner Cartridges

Finally, close the top cover and press down firmly at both sides so that the cover latches closed. This will lock the cartridge into place and x3100 toner into the image drum unit. Page 57 then lower the right end of the cartridge onto the image drum unit. USB cable must be Transparencies should be of the type designed for use in copiers and laser printers.


To remove a sheet from the central area of the belt 2carefully separate the sheet from the belt surface and withdraw the sheet. It is contained in four cartridges: Holding the c1300 by its handle 1lift the fuser straight up and out of the printer. The current printer status is shown.

Identify the fuser handle 1 on the top of the fuser unit. To remove it proceed as follows, otherwise skip to step Identify the locking clips 2 f3100 each end of the RAM expansion slot 1. Enter text from picture: Click the Printing Preferences button 1. Check inside the cover for sheets in this area and remove any that you find, then close the cover.